Qidi X-plus Firmware Jun 2026

For power users, the stock Qidi X-Plus firmware is too limiting. Because the printer uses a standard MKS Robin Nano V1.2 or V2.0 board with an STM32F407 chip, you can install .

A: No. The stock closed firmware overwrites these on boot. You must send M201 , M203 , M204 G-codes via the start G-code in your slicer, or switch to Klipper. Qidi X-plus Firmware

As of 2025-2026, Qidi Tech has largely moved focus to newer printers like the Qidi Max 3 and Plus 4, which run proprietary Klipper-based firmware out of the box. This means . For power users, the stock Qidi X-Plus firmware