Apollo 13 -

The objective was simple on paper: land in the Fra Mauro highlands, a hilly region on the moon rich in geological interest, to collect samples and deploy scientific experiments.

Inside the Apollo 13 service module, a routine procedure requested by Swigert—a “cryo stir” of the liquid oxygen tanks—sent a command to a small, damaged fan inside Oxygen Tank No. 2. The tank had a fatal flaw: Teflon insulation on its internal wires had been damaged during a pre-launch test months earlier at the Kennedy Space Center. When the fan was turned on, a short circuit ignited the Teflon. In the pure oxygen environment of the tank, the fire was instantaneous and explosive. The tank’s internal pressure skyrocketed from 900 psi to over 1,000 psi in a fraction of a second. The tank blew its dome off, tearing a hole in the adjacent Oxygen Tank No. 1 and shredding the service module’s aluminum panel. Apollo 13

The cast is frequently praised for their grounded, professional portrayals. brings a relatable "Everyman" quality to Jim Lovell, while The objective was simple on paper: land in

The initial plan was a “free return” trajectory—the simple loop around the Moon that would bring them back to Earth. But this would take too long; the CO₂ would kill them. They needed a faster, shorter path. Using the LM’s descent engine (which was never designed for continuous burns of this duration), they performed a 30-second burn, then a second, critical 4-minute 23-second burn. The margin for error was razor-thin. A miscalculation would send them careening off into deep space or skipping off Earth’s atmosphere like a flat stone on a pond. Lovell later said, “We had to thread a needle from a quarter of a million miles away.” The tank had a fatal flaw: Teflon insulation

Without the Service Module propulsion engine, NASA had to use the Lunar Module’s descent engine to alter the spacecraft's path.