((full)) | G41t-ad V1.0 Motherboard Manual

Pin 2 is Positive (+), Pin 4 is Negative (-).

A: Look for a 9-pin header (same as USB but labeled COM). The manual shows pin 1 = DCD, pin 2 = RXD, etc. You need a special bracket to use it. g41t-ad v1.0 motherboard manual

Connect the chassis buttons, primary power toggles, and status lights using this standard configuration: Pin 2 is Positive (+), Pin 4 is Negative (-)

Completely wipes operational parameters from the real-time clock (RTC) NVRAM. Pin 2 is Positive (+)

You might think, “It’s an old board; I can figure it out.” However, the manual is indispensable for several reasons:

She shorted the power pins with a screwdriver.

Carefully inspect the motherboard for any physical damage or defects. Check for any bent pins or corrosion on the CPU socket.