Removal - Vw Polo 6n Dashboard

To successfully remove the dashboard from a Polo 6N, gather the following:

| Issue | Solution | |-------|----------| | Dashboard cracks near vents | Normal aging; handle from metal brackets only | | Speedometer cable breaks | Replace before reassembly (common 6N fault) | | HVAC bowden cables pop off | Reattach with small zip tie as backup | | Heater matrix pipes leak | Now is the time to replace matrix | | Screw lost behind dash | Use magnetic tray; check all 10mm bolts | vw polo 6n dashboard removal

There is one hidden 13mm nut on the transmission tunnel, under the carpet, near the handbrake. Push the carpet back directly under the center of the dashboard. You will see a metal stud with a nut. Remove this nut. This secures the rear of the dashboard frame to the floor. To successfully remove the dashboard from a Polo

Before you touch the dashboard, you must clear the surrounding area. The Polo 6N is small, so you need to remove the front seats to give yourself room to lean in and lift the dash out. Remove this nut