Smoke Factory Data 2 - Manual
| Channel | Function | Value Range | Effect | | :--- | :--- | :--- | :--- | | 1 | Haze Output | 0-5 | Haze off | | | | 6-255 | Haze output 1-100% | | 2 | Fan Speed | 0-255 | Variable speed control (if equipped on your model) |
Only use Smoke Factory Data 2 Fluid (or approved equivalent). Using generic haze fluids will clog the heat exchanger and void your warranty. smoke factory data 2 manual
Official Data II Operating Instructions are available directly from the Smoke Factory Download Portal . Specification Power Consumption 2600 Watts (230V version) Warm-Up Time ~7 minutes Fluid Consumption 240 ml/min (max output) / 70 ml/min (continuous) Tank Capacity Control Options DMX 512, 0-10V Analog, Timer, Stand-Alone Weight & Size 12.8 kg | 58.5 x 23 x 24.7 cm Operating Instructions 1. Setup and Commissioning Download | smoke-factory.de | Channel | Function | Value Range |
| Error Display | Meaning | Solution | | :--- | :--- | :--- | | E-1 | Temperature too low (below 180°C) | Wait for warm-up. If persists, check heater connection. | | E-2 | Temperature too high (overheating) | Turn off for 30 mins. Check airflow and fan. | | E-4 | Fluid empty | Refill tank. Prime the system by running the pump manually. | | E-6 | Pump overrun | Air in the fluid line. Run the pump until fluid flows without air bubbles. | | No display | No power | Check PowerCon lock. Ensure the rear fuse is intact (10A, 250V). | | | E-2 | Temperature too high (overheating)
