Syloid Ed 3 Tds

| Property (per TDS) | Syloid ED 3 | Syloid ED 5 | Syloid C809 | | :--- | :--- | :--- | :--- | | | 6 - 8 µm | 10 - 12 µm | 4 - 5 µm | | Oil Absorption | 250 - 320 g/100g | 220 - 280 g/100g | 180 - 220 g/100g | | Primary Use | Defoamer carrier / Anti-block | High matting / Texture | Fine matting / Clear coats | | Bulk Density | Very Low (~0.15) | Low (~0.18) | Medium (~0.25) |

A: Check the TDS for particle size. If you are using ED 3 in a 1-micron thick clear coat, the 7-micron particles will protrude and cause haze. The TDS would tell you to switch to Syloid 7000 (smaller particle size). syloid ed 3 tds

Always validate your application with the official Syloid ED 3 TDS from W.R. Grace, and request a Certificate of Analysis (CoA) for the specific lot you purchase to ensure the D50 and oil absorption fall within your critical process window. | Property (per TDS) | Syloid ED 3

. It is specifically engineered for use in water-based and pigmented coatings to achieve gloss control and surface smoothness without sacrificing film integrity. IMCD Portugal 1. Technical Specifications Always validate your application with the official Syloid