Generates sustained traffic (e.g., 1 kB to 64 kB packets at 10–1000 Hz) to measure round-trip time (RTT), jitter, and maximum sustainable data rate without buffer overflow or TCP retransmission.
Need further help? Leave a comment below or visit the USR IOT support forum. For custom firmware or advanced integration, refer to the official USR-TCP232 series datasheet. usr-tcp232-test
Simulates up to 16 simultaneous TCP clients or UDP streams to validate the device’s concurrent session handling, queue management, and response under peak load. Generates sustained traffic (e
[INFO] Starting USR-TCP232 loopback test (TCP client mode) [TEST] Pattern: random, packet size: 1024 bytes, 10 packets/sec [PASS] 1000 packets sent, 1000 received, 0 errors, 0 lost [LATENCY] Avg RTT: 2.3 ms, Max RTT: 5.1 ms, Jitter: 0.4 ms [RESULT] All test criteria PASSED. For custom firmware or advanced integration, refer to
If you have ever worked with a USR IOT (or USR) serial to Ethernet converter—such as the popular USR-TCP232-302, USR-TCP232-304, or USR-TCP232-306 modules—you have likely encountered this software utility. The usr-tcp232-test tool is the official configuration and testing software provided by the manufacturer to simplify the setup, debugging, and data transmission testing of these serial device servers.