ECDIS must be connected to Position (GNSS/GPS), Heading (Gyro), and Speed (Log).

Use the buttons on the chart panel bar to toggle between Base , Standard , and All display modes.

The Sensors menu allows you to monitor and select your primary position source (e.g., GPS 1 vs. GPS 2). You can manually switch to Dead Reckoning (DR) mode if GPS data is unreliable by selecting DR as the primary source. 2. Passage Planning and Route Monitoring

3 تعليقات

  1. Ecdis Transas 4000 Answers -

    ECDIS must be connected to Position (GNSS/GPS), Heading (Gyro), and Speed (Log).

    Use the buttons on the chart panel bar to toggle between Base , Standard , and All display modes. ecdis transas 4000 answers

    The Sensors menu allows you to monitor and select your primary position source (e.g., GPS 1 vs. GPS 2). You can manually switch to Dead Reckoning (DR) mode if GPS data is unreliable by selecting DR as the primary source. 2. Passage Planning and Route Monitoring ECDIS must be connected to Position (GNSS/GPS), Heading

اترك ردّاً

لن يتم نشر عنوان بريدك الإلكتروني. الحقول الإلزامية مشار إليها بـ *