Sht 2000 Temperature Controller Manual Link

The SHT-2000 provides "dry contact" or simple switch outputs. You must loop your power source through these terminals to power your heaters or fans. 3. Interface Overview The display shows two main readings: Red LED: Current Temperature. Blue LED: Current Humidity. There are four buttons: Up/Down (Left side): Used for temperature settings. Up/Down (Right side): Used for humidity settings. 4. Programming Instructions How to Set Temperature (Heating/Cooling)

(what you can expect):

In the world of industrial automation and thermal management, the temperature controller is the heart of the operation. Whether you are managing a large-scale incubator, an industrial oven, or a plastic injection molding machine, precision is non-negotiable. Among the myriad of devices available, the stands out as a robust, reliable, and widely used PID controller. sht 2000 temperature controller manual

. It automatically switches between heating/cooling and humidifying/dehumidifying modes based on the start and stop values you program. m.media-amazon.com 🛠️ Key Specifications Power Supply: Available in AC 110V-220V or DC 12V-72V versions. Relay Output: Max 10A per relay (~1200W at 120V). Temperature Range: -20°C to +60°C (or up to +80°C depending on the model). Humidity Range: 0% to 100% RH. High-precision SHT20 probe included. 🔌 Wiring Guide The controller features 10 terminals on the rear panel. Standard sequence: Terminals 1 & 2: Power Input (AC or DC depending on your unit). Terminals 3–6: The SHT-2000 provides "dry contact" or simple switch outputs

These are usually pre-wired to the temperature/humidity probe. Interface Overview The display shows two main readings:

Press and hold the Right UP button for 3 seconds until the display flashes. Set your target "on" percentage.