Evoko Liso Factory Reset ((better))

: Reconnect the PoE/power cable. The Liso will detect the USB and boot from it.

| Symptom | Likely Cause | Solution | |--------|--------------|----------| | Device still won’t boot after reset | Corrupted firmware | Perform hardware reset again; if fails, contact Evoko support for recovery image. | | Calendar shows "No meetings" | Incorrect room account credentials | Verify password and MFA settings (use app password if MFA is enforced). | | Wi-Fi not saving settings | Network config conflict | After reset, forget all networks before reconnecting. | | Touchscreen calibration off | Persistent hardware config | Reset again via hardware method and choose "Wipe cache partition" first. | Evoko Liso Factory Reset

You cannot use a standard empty USB drive; it must be "flashed" with a bootable image. : Reconnect the PoE/power cable