If you ordered your Riverside 500 online, it likely arrived in a "90% assembled" state. Here is a step-by-step breakdown derived from the standard manual to get you road-ready.
: Check and adjust tire pressure. The recommended range is typically 2 to 4 bar (approx. 30–58 PSI), depending on rider weight .
: Inspect and replace brake pads. Check tires for excessive wear or cracks Every 5,000 km
: Most Riverside 500 models use a quick-release lever. Ensure it is fully tightened and the wheel is centered between the brake pads : Identify the Left ( ) and Right ( ) pedals. Apply grease to the threads Right pedal : Tighten clockwise (towards the front of the bike) Left pedal : Tighten counter-clockwise (towards the front of the bike) Safety Check
Note: If you need a PDF, search Decathlon’s "Support" section for "Riverside 500 notice." As of 2025, the direct link is often hidden under "Retrofit manuals."