ap# capwap ap primary-base <WLC_name> <WLC_IP> ap# capwap ap controller ip address <WLC_IP> ap# reload
Requires a Cisco WLC to function. The image name typically contains k9w8 . cisco air-cap2602i-a-k9 setup
The Cisco Air-CAP2602I-A-K9 is a popular wireless access point (AP) designed for indoor use in enterprise environments. This article provides a step-by-step guide on setting up and configuring the Cisco Air-CAP2602I-A-K9, including an overview of its features, hardware installation, and initial configuration. This article provides a step-by-step guide on setting
Search for c2600-k9w7-tar.153-3.JPJ or later (from Cisco Software Download – requires service contract). Example: ap3g2-k9w7-tar.153-3.JF8.tar including an overview of its features
| Symptom | Likely Cause | Solution | |---------|--------------|----------| | LED stays red | No IP or DHCP failure | Check switch port VLAN, PoE, DHCP scope | | Cycling amber | Cannot find WLC | Verify Option 43, DNS, or Layer 2 adjacency | | Join fails with cert error | WLC date not set | Set correct NTP on WLC | | AP keeps rebooting | PoE insufficient (15.4W max) | Use 802.3at switch or power adapter | | After conversion, no radio up | Missing country code | ap country-code US (autonomous) |
Before starting, ensure you have: