Bcm89885

The BCM89885 uses "strapping pins" (pulled high or low via resistors during power-up) to determine its boot configuration (e.g., PHY address, interface mode, auto-negotiation). Ensure your schematic uses 10kΩ resistors for strapping; capacitive loading on these pins can cause misconfiguration during the POR (Power-On Reset) time.

Features on-chip noise cancellation and low electromagnetic interference (EMI) emissions to meet stringent automotive EMC requirements. bcm89885

The automotive industry is moving toward . In an SDV, hardware is abstracted, and features are updated over the air (OTA). The BCM89885 supports this vision in two ways: The BCM89885 uses "strapping pins" (pulled high or