Jam 9000 | Kyocera

A technician diagnosed and a sticky sensor actuator coated with toner dust. After cleaning both and applying a light silicone lubricant to the actuator pivot, the machine ran 50,000 pages without a single Jam 9000. The total repair cost: $0 in parts, $150 in labor.

Specifically, indicates a paper jam at the inlet sensor of the optional finisher (such as the DF-7100, DF-730, or DF-770) or the internal mailbox unit. The printer has successfully transported the paper through the fuser and registration rollers, but the sheet either failed to arrive at the finisher’s entrance sensor within the expected time or arrived too early (a residual jam). kyocera jam 9000

: Dust, ink, or paper residue on the pickup and feed rollers can prevent them from "grabbing" the original document. Sensor Obstruction A technician diagnosed and a sticky sensor actuator

In less common cases, the finisher’s logic board fails to communicate with the main printer’s engine board. The printer sends paper, but the finisher never activates its inlet rollers due to a missing signal. This typically requires a firmware update or board replacement. Specifically, indicates a paper jam at the inlet