The physical walkthrough covers structural, mechanical, and electrical fire safety provisions. Key areas include:
This section causes the most failures because damage is often invisible until an inspection. scdf inspection checklist
Failing an inspection can lead to costly delays, hefty fines, or even closure orders. However, failure is often avoidable. Most non-compliances stem not from major structural flaws, but from minor oversights in maintenance and housekeeping. However, failure is often avoidable
Before the physical inspection, ensure all paperwork is organized. A Registered Inspector (RI) will verify these to confirm initial design compliance. A Registered Inspector (RI) will verify these to
| | Critical Item | Frequency | | :--- | :--- | :--- | | Exterior | Fire engine access road clear | Daily | | Exits | No locks on panic bars; doors self-close | Hourly (visual) | | Extinguishers | Green pressure gauge; serviced <12 months | Monthly | | Sprinklers | 500mm clearance below heads | Weekly | | Alarm Panel | No red "Fault" or "Trouble" lights | Daily | | FSM Logs | All monthly entries signed | Monthly | | Fire Doors | No wedges or door stops | Continuous | | Signage | Illuminated "EXIT" visible | Monthly (test) |