Climaveneta W3000 Modbus -

The interface is a powerful, reliable gateway to the heart of your chiller plant. While the initial setup requires attention to electrical details (RS-485 termination) and register mapping (float swapping), the payoff is enormous: centralized monitoring, remote setpoint management, predictive analytics, and utility bill savings.

Note: All addresses below are in format. If your SCADA uses holding register (1-based) , add 1 to the address. climaveneta w3000 modbus

The W3000 manages:

To establish communication, you must configure the following settings within the controller's user menu: Baud Rate: Typically 9600 or 19200 baud Range from 001 to 200 (Default is often 11) Supervision Enable: The interface is a powerful, reliable gateway to

The base W3000 motherboard has a slot for an optional fieldbus card. The specific part number for Modbus RTU is often denoted as or "Scheda Modbus RTU" . Verify with Climaveneta technical documentation, as some units use a universal gateway card that must be configured for Modbus. If your SCADA uses holding register (1-based) ,