Redmi 9 Edl Test Point |work| -

Common pairing:

On some revisions, there is a single test point labelled TP and a nearby ground point. You short the test point to a ground (e.g., the metal shielding of the processor). redmi 9 edl test point

: Using a pair of metal tweezers, you touch both gold points at once. While holding the tweezers in place, you plug in the USB cable. If successful, your PC will recognize the device, even if the phone screen stays completely black. Why People Use It Common pairing: On some revisions, there is a

| Problem | Possible Fix | | :--- | :--- | | | This is not EDL. It's a diagnostic mode. Disconnect battery, re-short test points. | | Device disconnects after 5 seconds | Weak short or bad USB cable. Also, some Windows USB ports don't supply enough current. Use a USB 2.0 port. | | Mi Flash says "Object reference not set to an instance of an object" | Corrupt ROM or wrong ROM type. Redownload the Fastboot ROM. | | Cannot find test points | There are up to 3 motherboard revisions for Redmi 9. One revision has the points under a small black sticker near the processor. Another revision uses a single point plus ground (use any metal shield). | While holding the tweezers in place, you plug

For advanced users only. You need the correct ( prog_emmc_firehose_Sm6115_ddr.elf or similar for lancelot).